Joint Seats-manufacture,factory,supplier from China

Articulated joint refers to the connection point or joint between two objects or structures. Articulation joints can be made of various forms and materials, which are used to realize different types of connection functions, such as rotation, swing, fixation and so on.NAMEArticulated Joint ProductsMATERIAL42CrMoHARDNESS 235-280INNER DIAMETER210OUTSIDE DIAMETER287Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians.

The joint seats produced by our company are mainly used in wind power generation industry. Raw materials are purchased from hot rolled round steel or steel ingots recognized at home and abroad. We can carry out hot forging according to customers' requirements, and meet the requirements of ultrasonic flaw detection (UT). Forging can improve product performance and save costs.

The joint joints produced by our Baohua company are mainly used in the wind power industry and equipment accessories of construction machinery. Forging the size of the internal gear ring according to the requirements of customers for using round steel in product materials. Bulk purchasing can open molds for specialized supply and finishing production.

Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons. Mainly in the automobile, hydraulic machinery, wind power generation, petroleum machinery parts, construction machinery, mining, metallurgy, shipbuilding machinery and other industries to produce related accessories. The products sold are oriented at home and abroad.

Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment, and is used for the connection between two equipment, such as reducing pipe flanges. Flange connection or flange joint refers to the detachable connection of flange, gasket and bolt as a set of combined sealing structure.MATERIAL4130-75KHARDNESS207-237INNER DIAMETER52.71OUTSIDE DIAMETER504.95Our Baohua Company was founded in 1969.

Flange, also known as flange or flange. flange is part of connecting shaft, that's used to connect pipe ends; it's also used for flanges on the inlet and outlet of gadget, and is used for the connection among two system, such as reducing pipe flanges. flange connection or flange joint refers to the detachable connection of flange, gasket and bolt as a hard and fast of combined sealing structure. pipeline flange refers to the flange used for piping in pipeline device, and the inlet and outlet flange of device when it is used on gadget.

Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment, and is used for the connection between two equipment, such as reducing pipe flanges. Flange connection or flange joint refers to the detachable connection of flange, gasket and bolt as a set of combined sealing structure. Pipeline flange refers to the flange used for piping in pipeline device, and the inlet and outlet flange of equipment when it is used on equipment.

Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment, and is used for the connection between two equipment, such as reducing pipe flanges. Flange connection or flange joint refers to the detachable connection of flange, gasket and bolt as a set of combined sealing structure. Pipeline flange refers to the flange used for piping in pipeline device, and the inlet and outlet flange of equipment when it is used on equipment.

As a mechanical part that stops or slows down the moving parts in the machine, the brake shell can be produced according to the materials required by customers in the production process. At present, our Baohua Company uses 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6, etc., which are widely used. The processing of the brake shell needs to be completed by heating, pre-forging, forming, trimming and other processes. According to different weights, the forged products can be forged on different forging equipment units, and the weight of forged products can reach 6kg-500kg.

As a mechanical part that stops or slows down the moving parts in the machine, the brake shell can be produced according to the materials required by customers in the production process. At present, our Baohua Company uses 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6, etc., which are widely used. The processing of the brake shell needs to be completed by heating, pre-forging, forming, trimming and other processes. According to different weights, the forged products can be forged on different forging equipment units, and the weight of forged products can reach 6kg-500kg.

For the production of plugs, they are mainly used in accessories of petroleum and mechanical equipment.Its function is to prevent the flow of fluid through expansion or differential pressure sealing.Material45#Hardness241-287Inner Diameter220Outside Diameter611Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.

The high neck flange produced by our company is mainly used in petroleum machinery industry. Raw materials are purchased from round steel with recognized quality at home and abroad. We can forge the corresponding model of dies and hammers according to customers' requirements, thus improving production efficiency and saving time.

Connector is a kind of mechanical assembly used to connect different components or parts, which is widely used in industry, manufacturing and machining. The connector can effectively connect different types of materials and parts, such as metal, plastic, rubber, pipes, cables, etc. Common connection forms include threaded connection, bayonet connection, welded connection, plug connection, etc.Baohua company was founded in 1969, from the initial initial processing to the industrial production of blank, quenching and tempering, rough machining, heat treatment, nitriding and finishing.

The working medium used by the hydraulic press not only transfers the pressure, but also ensures that the working parts of the machine work sensitively, reliably, with long service life and less leakage. The basic requirements for working medium of hydraulic press are: ① proper fluidity and low compressibility to improve transmission efficiency; ② Able to prevent corrosion; ③ Good lubrication performance; ④ Easy to seal; ⑤ Stable performance, no deterioration after long-term operation.

Brake housing products refer to mechanical parts that have the functions of slowing down, stopping or maintaining the stopped state of moving parts (or moving machinery).The brake housings produced by our Baohua company are mainly used in large-scale equipment with high safety requirements such as construction machinery.

Shaft: one of the main parts in machinery. Generally, it is a metal round rod around which wheels and other rotating parts rotate or follow it.As a big category, shafts are subdivided into intermediate shafts, crankshafts, driving shafts, etc.The intermediate shaft forgings produced by our company are mainly used in construction machinery industry, petroleum industry and wind power industry. The raw materials are hot rolled round steel or ingot recognized at home and abroad.

Our company can independently design and process forging dies according to the drawings, and will try our best to save forging materials. The weight of the forged product can reach 60kg-5000kg, and the forging needs to be completed through heating, pre-forging, forming and other processes. Various materials including 42CrMo, 4140, 4130, 40Cr, 20CrMnMo, 18CrNiMo7-6, 410SS can be forged. Our company has API certificate and SQ1 certificate and has many years of experience in petroleum product processing.The casing head is usually made of 35 or 42 Cr Mo alloy structural steel.

The support ring, also called the guide ring, is a part used on the piston or piston rod of a hydraulic cylinder or cylinder to support the movement of the piston or piston rod. It can prevent the piston or piston rod from directly contacting and rubbing with the cylinder body during the movement, thus protecting the cylinder body from being damaged.The support ring produced by our Baohua company is mainly used in equipment accessories in the petroleum industry. Forging the size of the support ring according to the requirements of customers for using round steel in product materials.

Connectors refer to components used to connect electrical components or electronic devices, which are an indispensable part of electronic circuits. The connector can be connected with power supply, signal and control lines to make the circuit work normally and reliably.The features of the connector are as follows:1. High reliability: the connector is made of finished materials, which has good mechanical properties and corrosion resistance and can work stably for a long time.2.

Baohua company was founded in 1969, from the initial initial processing to the industrial production of blank, quenching and tempering, rough machining, heat treatment, nitriding and finishing. And has ISO 9001, API 20b and API Q1 certificates.The forging equipment of our Baohua company mainly includes: five tons and three tons of free forging hammers, 2500 tons, 1000 tons and 600 tons of friction presses, six large splint hammers and various types of air hammers, and 1000 tons of multi-directional die forging presses.

Torque arm in wind power refers to an important structural part of wind turbine, which is used to convert wind energy into electric energy. The rotor of wind turbine usually includes impeller (blade), shaft and torque arm.

The torque arm we produce is mainly used in wind power generation industry, and it is an indispensable part of large fan blades.NAMETORQUE ARMMATERIAL334CrNiMo6HAEDNESS284-345INNER DIAMATER21OUTSIDE DIAMETER373Our Baohua Company was founded in 1969, and it has gone through three generations from state-owned to individual operation, covering an area of 140,000 ㎡, with 260 employees, 46 engineering technicians and more than 100 finishing operation equipment.The company's forging equipment mainly includes: five tons and three tons of free forging hammers, 2500 tons, 1000 tons and 600 tons of

Our Baohua company has mold design engineers who can provide drawings according to customersIndependently designed and developed the mold, making the fixed shaft locking sleeve integrally forged, greatly saving materials, and improving the stability of the product. In addition, our company has the ability of finishing, which can cover multiple integrated processes such as forging, machining, heat treatment and finishing, and can finally achieve the delivery of finished products.

The materials we use in the production of torque arm are generally made of 45 or 40Cr steel. According to the drawings provided by customers, through a series of processes such as forging, tempering, lathe machining, hobbing, drilling, quenching, flaw detection, high-temperature tempering, testing and packaging, the torque arm products that meet the needs of customers are created.